Interphase Tech iSPAN Bedienungsanleitung

iSPAN™ Serial WAN AdapterUsers GuideDocument No. UG05535-002-A2Release Date: July 2002

Setting Up Channels for Logical Adapters80 Interphase CorporationSetting Up WAN PropertiesThe following illustration shows the WAN section of the Chan

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 81PPP WAN PropertiesThe PPP Properties dialog box enables you to set up WAN

Setting Up Channels for Logical Adapters82 Interphase CorporationFor each authentication method chosen, a tabbed section appears under the checkbox fi

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 83Next, if you want to set up PPP port properties, skip to Setting Up Port P

Setting Up Channels for Logical Adapters84 Interphase Corporationremote peer along with the local address (which is generally automatically provided),

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 85For incoming calls, this number determines from which group the incoming c

Setting Up Channels for Logical Adapters86 Interphase CorporationFor detailed information about setting up protocol parameters using this dialog box,

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 87PPP Serial Port PropertiesThe following illustration shows the Port sectio

Setting Up Channels for Logical Adapters88 Interphase Corporationb. Specify the clock, coding, and DSR Timer properties for the serial line. c. Click

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 89b. On the X.25 protocol properties dialog box, configure the X.25 network

iSPAN Serial WAN Adapter Users Guide i1ContentsUsing This Guide...

Setting Up Channels for Logical Adapters90 Interphase Corporation1. In the Card field, if more than one physical iSPAN-Serial WAN adapter is installed

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 91Viewing Channel StatusTo view channel status information, do the following

Deleting Channels from Logical Adapters92 Interphase CorporationThe following table describes channel status parameters.Deleting Channels from Logical

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 932. In the Channels section of the NDIS Driver Setup dialog box, select the

Manually Disconnecting a Channel94 Interphase CorporationTo manually disconnect an active channel, do the following:1. If needed, start the NDIS drive

6iSPAN Serial WAN Adapter Users Guide 956 Logging NDIS DriverEventsOverviewThe NDIS Driver Log utility is installed when you install the NDIS driver.

Accessing Online Help96 Interphase CorporationAccessing Online HelpFor detailed information about the functions and dialog boxes described in this cha

Chapter 6: Logging NDIS Driver EventsiSPAN Serial WAN Adapter Users Guide 97Viewing Events in the NDIS Driver LogThe events displayed on the NDIS Driv

Customizing NDIS Driver Log Settings98 Interphase CorporationLog MenuFigure 6-2. Log MenuUse the Log menu to navigate to the Windows NT Log or the ND

Chapter 6: Logging NDIS Driver EventsiSPAN Serial WAN Adapter Users Guide 99Parameters MenuFigure 6-3. Parameters MenuUse the Parameters menu to cust

ii Interphase CorporationDB25 Connector...20V.24 Interface ...

Customizing NDIS Driver Log Settings100 Interphase CorporationThe Configure Logging dialog box appears.Figure 6-4. Configure Logging Dialog Box2. Sel

Chapter 6: Logging NDIS Driver EventsiSPAN Serial WAN Adapter Users Guide 101The Display dialog box appears.Figure 6-5. Display Dialog Box2. Select t

Customizing NDIS Driver Log Settings102 Interphase Corporation4. To change the font, click the Font button. Then on the Windows NT Font dialog box, ch

Chapter 6: Logging NDIS Driver EventsiSPAN Serial WAN Adapter Users Guide 103The Filter dialog box appears.Figure 6-6. Event Filters Dialog Box2. Ent

Viewing Events in the NT Event Viewer104 Interphase CorporationViewing Events in the NT Event ViewerIn addition to the NDIS Driver Log dialog box, you

Chapter 6: Logging NDIS Driver EventsiSPAN Serial WAN Adapter Users Guide 105Channel disconnection. Indicates when a channel has been disconnected for

Viewing Events in the NT Event Viewer106 Interphase CorporationDouble-clicking one of the events in the list opens the following dialog box, which sho

7iSPAN Serial WAN Adapter Users Guide 1077Installing SNA ServerLink Services SoftwareOverviewSNA Server link services allow you to connect a Windows N

Verifying Minimum Requirements108 Interphase CorporationNOTEThe iSPAN-Serial WAN adapter is named 5535-1P-SR in the software installation and configur

Chapter 7: Installing SNA Server Link Services SoftwareiSPAN Serial WAN Adapter Users Guide 109Running the Setup Program To install the Base driver so

iSPAN Serial WAN Adapter Users Guide iiiSetting Up Channels for Logical Adapters...75Setting Up General Properties

Installing the Base Driver110 Interphase CorporationSetting Up WAN PropertiesAfter the Base driver software is installed as described in Running the S

Chapter 7: Installing SNA Server Link Services SoftwareiSPAN Serial WAN Adapter Users Guide 111NOTEIf the Cards list is empty, the adapter might not b

Installing the Base Driver112 Interphase Corporation3. In the Modem signals field, select the method for handling modem signals. (In most cases, the d

Chapter 7: Installing SNA Server Link Services SoftwareiSPAN Serial WAN Adapter Users Guide 113A message informs you that the Base driver package has

Installing Interphase SNA Link Services114 Interphase CorporationThe Microsoft SNA Server Manager window appears.Figure 7-6. Microsoft SNA Server Man

Chapter 7: Installing SNA Server Link Services SoftwareiSPAN Serial WAN Adapter Users Guide 1153. Click Continue.The Setup Options dialog box appears.

Installing Interphase SNA Link Services116 Interphase CorporationThe Link Service Installation dialog box appears, listing available link services. Fi

Chapter 7: Installing SNA Server Link Services SoftwareiSPAN Serial WAN Adapter Users Guide 117SNA Server setup requests the software path in the Link

Installing Interphase SNA Link Services118 Interphase Corporation8. The Link Service Installation dialog box reappears, listing Interphase link servic

Chapter 7: Installing SNA Server Link Services SoftwareiSPAN Serial WAN Adapter Users Guide 119After all necessary files are copied for the selected l

iv Interphase CorporationRunning the Setup Program...109Setting Up WAN Properties ...

Removing Base Driver Software120 Interphase CorporationCAUTIONIf any other software requiring the Base driver (such as the Interphase NDIS driver) is

Chapter 7: Installing SNA Server Link Services SoftwareiSPAN Serial WAN Adapter Users Guide 1215. When a dialog box prompts you to confirm the card re

Removing Base Driver Software122 Interphase Corporation

8iSPAN Serial WAN Adapter Users Guide 1238Setting up SNA ServerLink ServicesOverviewThis chapter explains how to insert and set up Interphase SNA Serv

Accessing Online Help124 Interphase CorporationAccessing Online HelpFor detailed information about the functions and dialog boxes described in this ch

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 125Inserting and Setting Up Interphase Link ServicesUse the SNA Ser

Inserting and Setting Up Interphase Link Services126 Interphase CorporationFigure 8-2. Insert Link Service Dialog Box5. Select the Interphase link se

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 127Editing an Interphase Link ServiceTo edit an existing Interphase

Inserting and Setting Up Interphase Link Services128 Interphase CorporationSetting Up a Frame Relay Link ServiceAfter you insert or select to edit an

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 1293. If you want to change the default firmware or hardware proper

iSPAN Serial WAN Adapter Users Guide vCHAPTER 10 TroubleshootingOverview...

Inserting and Setting Up Interphase Link Services130 Interphase CorporationThe following dialog box appears, showing Virtual Circuit properties.Figure

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 1318. Click OK to save the link service configuration.– If you edit

Inserting and Setting Up Interphase Link Services132 Interphase CorporationSetting Up an SDLC Link ServiceAfter you insert or select to edit an Interp

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 133Configuring SDLC Mode SettingsTo configure SDLC mode settings, d

Inserting and Setting Up Interphase Link Services134 Interphase CorporationConfiguring SDLC Card Configuration SettingsTo configure SDLC card configur

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 1354. To configure the Serial line properties for the SDLC link ser

Inserting and Setting Up Interphase Link Services136 Interphase Corporationthat link service, as described in Setting Up a Frame Relay Link Service on

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 137Use this dialog box to configure the inserted link service, as f

Inserting and Setting Up Interphase Link Services138 Interphase Corporationc. Click OK to save the Frame Relay protocol properties and return to the X

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 139Inserting a ConnectionThe Microsoft SNA Server Manager window di

vi Interphase CorporationSVCs... 186PVCs...

Inserting a Connection140 Interphase Corporation3. Select the SNA Service icon. 4. From the Insert menu, select Connection. Then select one of the fol

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 141The Connection Properties General dialog box appears.Figure 8-10

Inserting a Connection142 Interphase CorporationNOTEProperties in the Connection Properties General dialog box apply to the selected Interphase connec

Chapter 8: Setting up SNA Server Link ServicesiSPAN Serial WAN Adapter Users Guide 1439. If you need to insert another connection, repeat steps 4 thro

Inserting a Connection144 Interphase Corporation

9iSPAN Serial WAN Adapter Users Guide 1459Setting up Firmwareand HardwareOverviewThe WAN Adapters Setup utility enables you to manage hardware and fir

Accessing Online Help146 Interphase CorporationAccessing Online HelpFor detailed information about the functions and dialog boxes described in this ch

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 147When you start the utility, the WAN Adapters Setup dialog box appea

Firmware Management148 Interphase CorporationNOTEIf the Cards list is empty, and the Add button is disabled, the adapter might not be properly install

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 149The firmware status is represented by a general LED color for the f

iSPAN Serial WAN Adapter Users Guide vii2Using This GuidePurposeThis Users Guide provides information about the Interphase iSPAN™ Serial WAN adapter.

Firmware Management150 Interphase CorporationSetting Up X.25 Network PropertiesTo connect your adapter to an X.25 network, you must create one or more

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 151The X.25 Protocol Properties dialog box appears.Figure 9-2. X.25 P

Firmware Management152 Interphase CorporationThe X.25 Packet Level Properties dialog box appears.Figure 9-3. X.25 Packet Level Propertiesb. In the Co

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 153The X.25 Frame Level Properties dialog box appears.Figure 9-4. X.2

Firmware Management154 Interphase CorporationThe Serial Line Properties dialog box appears.Figure 9-5. Serial Line Propertiesb. Specify the serial li

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 155Setting Up Frame Relay Network PropertiesTo connect your adapter to

Firmware Management156 Interphase CorporationThe Frame Relay protocol properties dialog box appears.Figure 9-6. Frame Relay Protocol Properties Dialo

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 157The Frame Relay Data Link Properties dialog box appears.Figure 9-7.

Firmware Management158 Interphase CorporationThe Serial Line Properties dialog box appears.Figure 9-8. Serial Line Propertiesa. Select the serial lin

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 159Hardware ManagementThe Cards section of the WAN Adapters Setup dial

Text Conventionsviii Interphase CorporationCAUTIONThe Caution icon brings to your attention to those items or steps that, if not properly followed, co

Hardware Management160 Interphase CorporationThe Card properties dialog box appears.Figure 9-9. Card Properties Dialog BoxThe fields in the Bus, Reso

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 161Setting Up Serial Port PropertiesUse the SR Port Properties dialog

Hardware Management162 Interphase CorporationTo display the SR Port Properties dialog box:1. Start the WAN Adapters Setup utility, if needed, as descr

Chapter 9: Setting up Firmware and HardwareiSPAN Serial WAN Adapter Users Guide 163Saving WAN Adapters Setup PropertiesSave any change to WAN adapter

Saving WAN Adapters Setup Properties164 Interphase Corporation

10iSPAN Serial WAN Adapter Users Guide 16510TroubleshootingOverviewThis chapter provides possible solutions for common problems you might encounter wh

Problems and Solutions166 Interphase CorporationProblems and SolutionsProblem Possible Solution(s)Adapter is not detected during NDIS driver installat

Chapter 10: TroubleshootingiSPAN Serial WAN Adapter Users Guide 167Undetected adapter during SNA Server Link Services software setupThis problem assum

Problems and Solutions168 Interphase CorporationComputer does not boot up or host adapter not foundYour PCI bus automatically configures the hardware

AiSPAN Serial WAN Adapter Users Guide 169ASpecificationsAdapter SpecificationsOperating EnvironmentHost Bus Interface PCI Local Bus Revision 2.1PCI Fo

Using This GuideiSPAN Serial WAN Adapter Users Guide ixPressing the return key (↵ Return) at the end of the command line entry is assumed, when not e

Storage Environment170 Interphase CorporationStorage EnvironmentThis section assumes the adapter is stored in its original anti-static bag and box.Tem

BiSPAN Serial WAN Adapter Users Guide 171B SynWatch UtilityOverviewSynWatch is a protocol analyzer that enables you to watch frames exchanged between

Accessing Online Help172 Interphase CorporationAccessing Online HelpFor detailed information about the functions and dialog boxes described in this ap

Appendix B: SynWatch UtilityiSPAN Serial WAN Adapter Users Guide 173Figure B-1. Main SynWatch Dialog BoxThe main SynWatch dialog box has two sections

Watching the Serial Port174 Interphase CorporationWatching the Serial PortSynWatch provides several options for watching the serial port, which is use

Appendix B: SynWatch UtilityiSPAN Serial WAN Adapter Users Guide 175Stopping and Freezing the Display To stop frame watching and discard all frame inf

Changing Watch Display Settings176 Interphase CorporationThe Watch dialog box appears.Figure B-2. Watch Settings2. In the Size of a watched frame fie

Appendix B: SynWatch UtilityiSPAN Serial WAN Adapter Users Guide 177Changing Fonts Used for Display TextTo change the font color or style of the text

Modifying Event Buffer Parameters178 Interphase Corporation4. To change the font for all display text, click the Font button. On the Font dialog box,

Appendix B: SynWatch UtilityiSPAN Serial WAN Adapter Users Guide 179The Buffer dialog box appears:Figure B-4. SynWatch Buffer Settings2. In the Buffe

NOTESee Appendix F for Regulatory Statements/Conditions that affect the operation of this product.The CE Declaration of Conformity can be found at www

Driver Updatesx Interphase Corporation5. A new web page appears with a list of the latest released user guides available for the product. Click on the

Saving and Editing Frames180 Interphase CorporationSaving and Editing FramesUse the SynWatch Save option to save all frame information recorded in the

CiSPAN Serial WAN Adapter Users Guide 181CQuick Reference ofCommon TasksOverviewThis chapter explains how to complete common tasks associated with the

Procedures182 Interphase CorporationIf you want to... Do this...Determine which version of Windows NT Service Pack is installed1. From the Start menu,

Appendix C: Quick Reference of Common TasksiSPAN Serial WAN Adapter Users Guide 183Make sure that drivers are running1. From the Start menu, select Pr

Procedures184 Interphase CorporationEnable IPX routing First, the RIP for NWLink IPX Service must be installed in the Windows NT Network Services list

DiSPAN Serial WAN Adapter Users Guide 185DProtocols OverviewThis appendix provides a short overview of the following protocols used by the iSPAN-Seria

X.25 Protocol186 Interphase CorporationLayer 2: Frame Level LayerThe Frame Level layer is an implementation of the ISO HDLC standard called Link Acces

Appendix D: Protocols OverviewiSPAN Serial WAN Adapter Users Guide 187PVCsPVCs are similar to leased lines because the connection is always present. T

PPP Protocol188 Interphase CorporationPPP ProtocolThe Point-to-Point Protocol (PPP) provides a standard method for transporting multi-protocol datagra

EiSPAN Serial WAN Adapter Users Guide 189EPCI/PMC TechnologyOverviewPCI/PMC TechnologyIntel® Corporation’s Architecture Lab, along with leading comput

1iSPAN Serial WAN Adapter Users Guide 11IntroductionAdapter OverviewThe Interphase iSPA N-Serial WAN adapter is a single-slot, Peripheral Component In

PCI/PMC Technology190 Interphase Corporation• Buffers located between peripherals and the CPU that allow multiple, high-speed peripherals to be attac

FiSPAN Serial WAN Adapter Users Guide 191FRegulatoryStatementsFCC5535 SR AdapterFCC Part 15 Regulatory ComplianceThis equipment has been tested and fo

Canadian192 Interphase CorporationCanadianTested to Comply with Canadian StandardsThis Class A digital apparatus complies with Canadian ICES-003.Cet a

Appendix F: Regulatory StatementsiSPAN Serial WAN Adapter Users Guide 193EuropeRegulatory Information for EuropeThis equipment displays the CE 165 X m

Europe194 Interphase Corporation

iSPAN Serial WAN Adapter Users Guide 195Glossary2B+D ◆ See BRI (Basic Rate Interface).23B+D ◆ See PRI (Primary Rate Interface).30B+D ◆ See PRI (Pri

196 Interphase CorporationAsynchronous Transmission ◆ Method of sending data in which the interval between characters may be of unequal length. The c

iSPAN Serial WAN Adapter Users Guide 197BRI (Basic Rate Interface) ◆ A defined ISDN interface that includes two B channels and one D channel. Also kn

198 Interphase CorporationCO (Central Office) ◆ The site where the local Telco switches reside for the telephone system's call routing and all o

iSPAN Serial WAN Adapter Users Guide 199(ANSI) Standard T1.618 and the International Telegraph and Tele-phone Consultative Committee (CCITT) Standard

Hardware Overview2 Interphase CorporationThe modular adapter architecture includes a CPU motherboard and a WAN daughtercard. The CPU motherboard is po

200 Interphase CorporationDistributed Function Terminal (DFT) ◆ 1) A protocol used for com-munication between a terminal and an IBM 3270 or IBM 3174

iSPAN Serial WAN Adapter Users Guide 201Excess Burst Size ◆ (Be) The maximum amount of uncommitted data (in bits) in excess of Bc that a frame relay

202 Interphase CorporationIEEE (Institute of Electrical and Electronic Engineers) ◆ An infor-mation exchange organization. Among other functions, it

iSPAN Serial WAN Adapter Users Guide 203LAP-D (Link Access Procedure-D) ◆ For ISDN, Data Link layer pro-cedure using D channel communications. For Fr

204 Interphase CorporationMbps (Megabits per second) ◆ Transmission speed or rate of one million bits per second.MBps (Megabytes per second) ◆ Trans

iSPAN Serial WAN Adapter Users Guide 205NI-1 (National ISDN1) ◆ A specification for a standard ISDN phone line. National ISDN 1 is intended to be a s

206 Interphase CorporationPMC (PCI Mezzanine Card) ◆ A daughter-card form factor imple-mentation of the PCI bus specification.POTS (Plain Old Telepho

iSPAN Serial WAN Adapter Users Guide 207RAI (Remote Alarm Indication) ◆ PRI alarm, also known as Yellow signal. This alarm indicates a carrier failur

208 Interphase CorporationRS-232 ◆ Universally accepted Electronics Industries Association standard that defines the signals between data terminal eq

iSPAN Serial WAN Adapter Users Guide 209of SNMP agents that are embedded in nodes and network devices on the network. SNMP relies on MIBs embedded in

Chapter 1: IntroductioniSPAN Serial WAN Adapter Users Guide 3• 4 MB dual port DRAM memory and 128 KB Flash EEPROM• Synchronous serial line with DB25

210 Interphase CorporationTCP is a reliable stream-delivery, virtual circuit connection-oriented protocol that runs on top of IP. Telnet, FTP, and log

iSPAN Serial WAN Adapter Users Guide 211X.21 ◆ (Packet-switched networks) International recommendation that defines a physical interface for X.25, us

212 Interphase Corporation

When using this index, keep in mind that a page number indicates onlywhere referenced material begins. It may extend to the page or pagesfollowing the

214 Interphase CorporationBase driver removal... 59, 119NDIS installation ... 35NDIS setup...

iSPAN Serial WAN Adapter Users Guide 215channel status... 91deleting channels ... 92manual channel co

216 Interphase Corporationtroubleshooting... 165UutilitiesNDIS Driver Setup ... 63SynWatch...

Software Overview4 Interphase Corporation• The Synwatch utility enables you to track connections and data traffic on the Serial port.NDIS DriverThe N

Chapter 1: IntroductioniSPAN Serial WAN Adapter Users Guide 5The following figure shows the capabilities of the NDIS driver. Figure 1-2. NDIS Driver

Software Overview6 Interphase CorporationSNA Server Link Services SoftwareThe SNA Server Link Services software provides Microsoft SNA Server link sup

Chapter 1: IntroductioniSPAN Serial WAN Adapter Users Guide 7– IP and IPX support (RFC 1332, RFC 1552)• X.25– ISO 8208, ISO 7776, IUT-T X.25– Packet

Software Overview8 Interphase CorporationPoint-to-Point and Multipoint ConnectionsThe iSPAN-Serial WAN adapter supports point-to-point and point-to-mu

Chapter 1: IntroductioniSPAN Serial WAN Adapter Users Guide 9Minimum System RequirementsFollowing are the minimum system requirements for using the bo

Copyright Notice© 2002 by Interphase Corporation. All rights reserved.Printed in the United States of America, 2002.This manual is licensed by Interph

Minimum System Requirements10 Interphase Corporation

2iSPAN Serial WAN Adapter Users Guide 112Installing the HardwareOverviewYou can install the adapter in any suitable PCI expansion slot. To install the

Installing the Adapter12 Interphase CorporationCAUTIONThe adapter is packed in an antistatic bag to protect it during shipment. Keep the adapter in it

Chapter 2: Installing the HardwareiSPAN Serial WAN Adapter Users Guide 13With a grounding strap connected to your wrist or ankle, do the following to

Installing the Adapter14 Interphase Corporation2. Disconnect all cables connected to the main system unit, and remove the computer cover according to

Chapter 2: Installing the HardwareiSPAN Serial WAN Adapter Users Guide 153. Locate a suitable PCI expansion slot, and remove the screw that attaches t

Installing the Adapter16 Interphase Corporation5. Carefully remove the adapter from its antistatic bag, and position the adapter in the PCI expansion

Chapter 2: Installing the HardwareiSPAN Serial WAN Adapter Users Guide 177. Replace the computer cover according to the manufacturer’s instructions. T

Installing the Adapter18 Interphase Corporation

3iSPAN Serial WAN Adapter Users Guide 193Connecting to the LineOverviewThe iSPAN-Serial WAN adapter can be connected as data terminal equipment (DTE)

AssistanceProduct Purchased from ResellerContact the reseller or distributor if• You need ordering, service or any technical assistance.• You receiv

DB25 Connector20 Interphase CorporationCAUTIONIncorrectly wired or installed cabling is the most common cause of communications problems for wide area

Chapter 3: Connecting to the LineiSPAN Serial WAN Adapter Users Guide 213 RxD (Receive Data)R(A) (Receive Data)RXD(A) (Receive Data)In4 RTS (Ready to

V.24 Interface22 Interphase CorporationV.24 InterfaceThe following specifications describe the V.24 interface:• Electrical specification: CCITT V.28,

Chapter 3: Connecting to the LineiSPAN Serial WAN Adapter Users Guide 23The following table and illustrations describe the V.24 signals on the connect

V.24 Interface24 Interphase CorporationFigure 3-1. V.24 DCE Connector242220171587654321TXCLKoutRIDTRRXCLKTXCLKinDCDGNDDSRCTSRTSRXDTXDShield

Chapter 3: Connecting to the LineiSPAN Serial WAN Adapter Users Guide 25Figure 3-2. V.24 Cable WiringV.35 InterfaceThe following specifications descr

V.35 Interface26 Interphase CorporationThe following table and illustrations describe the V.35 signals on the connector.Pin # Tw. Pair Name (CCITT #)

Chapter 3: Connecting to the LineiSPAN Serial WAN Adapter Users Guide 27Figure 3-3. V.35 DCE ConnectorXVTRJFDBRXC(A)RXD(B)RXD(A)RIDCDCTSGNDRXC(B)WUSP

V.35 Interface28 Interphase CorporationFigure 3-4. V.35 Cable WiringAdaptersideDCEsideMale DB25connectorISO2593connectorDrain wireBraidYCDEFHJBA15456

Chapter 3: Connecting to the LineiSPAN Serial WAN Adapter Users Guide 29V.11 InterfaceThe following specifications describe the V.11 interface:• Elect

Safety PrecautionsThe following general safety precautions must be observed during all phases of operation of this equipment. Failure to comply with t

V.11 Interface30 Interphase CorporationFigure 3-5. V.11 DCE Connector25 --TEST Test In7 - GND Ground Common1 - Shield Shield CommonPin # Tw. Pair Nam

Chapter 3: Connecting to the LineiSPAN Serial WAN Adapter Users Guide 31Figure 3-6. V.11 Cable WiringAdaptersideDCEsideMale DB25connectorISO4903male

Back-to-Back Configuration32 Interphase CorporationBack-to-Back ConfigurationThe iSPAN-Serial WAN adapter can be connected to another serial adapter i

Chapter 3: Connecting to the LineiSPAN Serial WAN Adapter Users Guide 33Connecting to the NetworkWARNINGBefore connecting the cable, read the Safety P

Connecting to the Network34 Interphase Corporation

4iSPAN Serial WAN Adapter Users Guide 354Installing theNDIS Software PackageOverviewThe NDIS driver enables the iSPAN-Serial WAN adapter to emulate a

Verifying Minimum Requirements36 Interphase Corporation4. Add an NDIS logical adapter.5. Set up network protocol properties.6. Complete the installati

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 37and select the Protocols tab to display the Network Protocols di

Installing the Drivers38 Interphase Corporation4. Click Add to begin loading the drivers. The system creates an adapter list in the Select Network Ada

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 39Figure 4-3. Insert Disk Dialog Box6. Insert the CD-ROM containi

WARNING The network cable(s) must remain disconnected from the telecommunications system until the card has been installed in the system. The inst

Installing the Drivers40 Interphase CorporationNOTEIf the Base driver is already installed (for example, if it was installed with Interphase SNA Link

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 41To continue the software installation, set up port properties as

Setting Up WAN Properties42 Interphase CorporationNOTEIf the Cards list is empty, the board might not be properly installed. See Problems and Solution

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 434. Click OK to return to the WAN Adapters Setup dialog box.5. Wh

Adding the NDIS Logical Adapter44 Interphase CorporationAdding the NDIS Logical AdapterAfter you respond OK to the message that the driver is running,

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 45The Network Adapters dialog box appears.Figure 4-10. New Logica

Setting Up Network Protocol Properties46 Interphase CorporationNext, set up network protocols for the logical adapter. Continue to the next section, S

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 47Setting Up IPX/SPX ProtocolsIf the IPX/SPX protocol is installed

Setting Up Network Protocol Properties48 Interphase CorporationTo set up IPX/SPX properties for the NDIS logical adapter, do the following:1. In the A

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 49Setting Up TCP/IP ProtocolsIf the TCP/IP protocol is installed,

END-USER LICENSE AGREEMENTFOR INTERPHASE CORPORATION SOFTWAREIMPORTANT NOTICE TO USER–READ CAREFULLYTHIS END-USER LICENSE AGREEMENT FOR INTERPHASE COR

Setting Up Network Protocol Properties50 Interphase CorporationTo set up TCP/IP properties for the NDIS logical adapter, do the following:1. In the Ad

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 516. Click OK.Completing the Software InstallationAfter you set up

Removing the Drivers52 Interphase CorporationCAUTIONIf you do not reinstall the Service Pack, the network may fail to start or malfunction when connec

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 53CAUTIONIf any other software requiring the Base driver (such as

Removing the Drivers54 Interphase CorporationFigure 4-14. Removing the NDIS Adapter Driver 3. Select Interphase 5535 NDIS Adapter, and click Remove.

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 55A warning message informs you that this action will permanently

Removing the Drivers56 Interphase Corporation6. After the NDIS driver is removed, the Interphase 553X Base Driver dialog box appears. Figure 4-16. Re

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 57To remove the Base driver along with the NDIS driver, do the fol

Removing the Drivers58 Interphase CorporationCompleting the Driver RemovalWhen the Base driver removal process is finished, the Network Adapters dialo

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 59Next, the following message prompts you to restart your computer

responsible for any transportation costs, unless expressly authorized in writing by Seller. This warranty does not cover damage to the Product resulti

Removing the Drivers60 Interphase CorporationThe Install/Uninstall dialog box appears.Figure 4-20. Removing the Base Driver3. Select Interphase 553X

Chapter 4: Installing the NDIS Software PackageiSPAN Serial WAN Adapter Users Guide 61The Interphase 553X Base Driver dialog box appears. Figure 4-21.

Removing the Drivers62 Interphase Corporation• Dynamically unloads the drivers from memory• Cleans up the registryWhen the Base driver removal proce

5iSPAN Serial WAN Adapter Users Guide 635 Setting Up the NDISDriverOverviewYou can create up to four NDIS driver configurations for connecting the iSP

Accessing Online Help64 Interphase Corporation• View the status of logical adapter connections• Set up channels for logical adapter connections• De

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 65c. On the Network adapters dialog box, select the Interphase NDIS logical

Starting the NDIS Driver Setup Utility66 Interphase CorporationThe NDIS Driver Setup dialog box contains two sections: Adapter and Channels.Adapter Fu

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 67Channels FunctionsUse the Channels section of the NDIS Driver Setup dialog

Starting the NDIS Driver Setup Utility68 Interphase CorporationUse the following icons in the Channels section of the NDIS Driver Setup dialog box to

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 69Adding a Logical AdapterTo add a new logical adapter to the NDIS driver co

any provision of this Agreement is held invalid, illegal, or unenforceable, the remaining provisions shall in no way be affected or impaired thereby.

Adding a Logical Adapter70 Interphase CorporationTo continue, set up WAN Networking properties for the new logical adapter as described in the next se

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 71Setting Up Logical Adapter Network PropertiesAfter you add a new logical a

Setting Up Logical Adapter Network Properties72 Interphase CorporationThe Properties dialog box appears for the displayed logical adapter. Figure 5-4.

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 73If one or both of the protocols are selected but unavailable, the protocol

Viewing Logical Adapter Connection Status74 Interphase CorporationViewing Logical Adapter Connection StatusTo view the logical adapter connection stat

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 75Setting Up Channels for Logical AdaptersChannel definitions specify the co

Setting Up Channels for Logical Adapters76 Interphase CorporationTo create or modify a channel for an NDIS logical adapter, do the following:1. In the

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 77Setting Up General PropertiesThe following illustration shows the general

Setting Up Channels for Logical Adapters78 Interphase CorporationSetting Up LAN PropertiesThe following illustration shows the LAN section of the Chan

Chapter 5: Setting Up the NDIS DriveriSPAN Serial WAN Adapter Users Guide 79The LAN Properties dialog box appears.Figure 5-10. LAN Properties Dialog